Zhejiang Arbueo Intelligent Equipment Manufacturing Co., Ltd.

Talking About The Working Principle Of Electric Injection Molding Machines

Oct 25, 2023 Leave a message

An electric injection molding machine is a processing injection molding machine in which all power is supplied by electricity. Thermoplastics can be injection molded and processed into a variety of molds. It is a kind of machine commonly used in the synthesis and processing of chemical materials. The injection molding machine is usually composed of an injection system, a mold clamping system, a hydraulic conveying system, an electrical control system, a lubrication system, a heating and cooling system, and a safety monitoring system.

 

The working principle of the electric injection molding machine is similar to that of the syringe used for injection, which is the technical process of injecting the plasticized molten plastic (i.e., viscous flow state) into the closed mold cavity by relying on the thrust of the screw (or plunger), and obtaining the product after curing and shaping.

 

Electric injection molding machine operation project: The injection molding machine operation project includes three aspects: control keyboard operation, electrical control system operation and hydraulic system operation. The selection of injection process, feeding, injection pressure, injection speed, ejection type, monitoring of the temperature of each section of the barrel, and adjustment of injection pressure and back pressure are carried out.

 

Generally, the molding technology process of the screw injection molding machine is: firstly, the granular or powdery plastic is included in the barrel, and the plastic becomes molten through the rotation of the screw and the heating of the outer wall of the barrel, and then the machine moves the mold clamping and the injection seat forward, so that the nozzle is close to the gate channel of the mold, and then the pressure oil is introduced to the injection cylinder to push the screw forward, so that the melt is written into the closed mold with low temperature at a high pressure and fast speed.

 

By insisting on a certain time and pressure (also known as pressure holding) and cooling, so that it can be solidified and formed, the mold can be opened and the product can be taken out (the intention of pressure holding is to avoid the regurgitation of the melt in the mold cavity, compensate the material into the mold cavity, and ensure that the product has a certain density and standard service). The basic needs of injection molding are plasticizing, injection, and molding.

 

Plasticizing is a condition for completing and ensuring the quality of molded products, and in order to meet the needs of molding, it is necessary to ensure that there is a sufficient pressure and speed for injection. At the same time, because the injection pressure is very high, a high pressure occurs in the mold cavity (the uniform pressure in the mold cavity is usually between 20~45MPa), so it is necessary to meet the large clamping force. It can be seen that injection equipment and clamping equipment are the key components of injection molding machines.