Zhejiang Arbueo Intelligent Equipment Manufacturing Co., Ltd.

How to calculate the injection volume for a plastic injection machine?

Jun 25, 2025Leave a message

As a seasoned supplier of Plastic Injection Machines, I understand the critical role that accurate injection volume calculation plays in the plastic injection molding process. This blog aims to provide a comprehensive guide on how to calculate the injection volume for a plastic injection machine, ensuring optimal performance and high - quality output for your projects.

Understanding the Basics of Injection Volume

The injection volume refers to the amount of molten plastic that is injected into the mold cavity during each injection cycle. It is a fundamental parameter that directly impacts the size, weight, and quality of the molded part. Calculating the injection volume correctly is essential for achieving consistent part dimensions, minimizing waste, and maximizing production efficiency.

Factors Affecting Injection Volume

Before delving into the calculation methods, it's important to understand the factors that can influence the injection volume:

  1. Part Design: The size, shape, and complexity of the molded part are the primary determinants of the required injection volume. Larger parts naturally require more plastic, while complex geometries may need additional material to fill all the cavities.
  2. Mold Design: The mold cavity's volume, including runners, gates, and vents, must be considered. A well - designed mold will minimize the amount of extra material needed for the runner system.
  3. Plastic Material Properties: Different plastic materials have different densities and flow characteristics. For example, high - density plastics will require more volume for the same weight compared to low - density plastics. The material's shrinkage rate also affects the final part size and, consequently, the injection volume.
  4. Machine Specifications: The injection unit of the plastic injection machine has a maximum injection volume capacity. It's crucial to ensure that the calculated injection volume is within the machine's capabilities.

Calculation Methods

Method 1: Volume Calculation Based on Part Dimensions

If you know the dimensions of the molded part, you can calculate its volume using basic geometric formulas. Here are some common shapes and their volume calculation methods:

  • Cuboid: For a part with length (L), width (W), and height (H), the volume (V) is calculated as (V = L\times W\times H).
  • Cylinder: For a cylinder with radius (r) and height (h), the volume is (V=\pi r^{2}h).
  • Sphere: For a sphere with radius (r), the volume is (V=\frac{4}{3}\pi r^{3}).

Once you have calculated the part volume, you need to account for the runner and gate volume. A typical runner system may add 10% - 30% to the part volume, depending on its design.

Hybrid Injection Moulding MachineHydraulic Plastic Injection Moulding Machine

Let's assume you have a cuboid - shaped part with (L = 100mm), (W = 50mm), and (H = 20mm). The part volume (V_{part}=100\times50\times20 = 100000mm^{3}=100cm^{3}). If the runner and gate system adds 20% to the part volume, the total injection volume (V_{total}=V_{part}\times(1 + 0.2)=100\times1.2 = 120cm^{3}).

Method 2: Weight - to - Volume Conversion

Another way to calculate the injection volume is by determining the weight of the part and then converting it to volume using the plastic material's density.

The formula for calculating volume from weight is (V=\frac{m}{\rho}), where (m) is the mass of the part and (\rho) is the density of the plastic material.

For example, if you have a part that weighs 50 grams and the plastic material has a density of (1.2g/cm^{3}), the volume of the part is (V=\frac{50}{1.2}\approx41.67cm^{3}). Again, you need to add the volume of the runner system.

Using Our Plastic Injection Machines for Precise Injection

At our company, we offer a wide range of plastic injection machines, including Hydraulic Clamping Injection Molding Machine, Hydraulic Plastic Injection Moulding Machine, and Hybrid Injection Moulding Machine. These machines are equipped with advanced control systems that allow for precise adjustment of the injection volume.

The hydraulic clamping injection molding machines provide high - pressure clamping force, ensuring accurate filling of the mold cavities. The hydraulic plastic injection molding machines are known for their reliability and ease of operation. Meanwhile, the hybrid injection molding machines combine the advantages of hydraulic and electric systems, offering energy - efficiency and high - speed operation.

Fine - Tuning the Injection Volume

After the initial calculation, it's often necessary to fine - tune the injection volume during the actual production process. Here are some steps to follow:

  1. Test Shots: Conduct test shots with the calculated injection volume. Inspect the molded parts for any defects such as short - shots (incomplete filling), flash (excess material), or warping.
  2. Adjustment: Based on the test shot results, make small adjustments to the injection volume. If there are short - shots, increase the injection volume slightly; if there is flash, decrease it.
  3. Monitoring and Optimization: Continuously monitor the production process and the quality of the molded parts. Over time, you can optimize the injection volume to achieve the best results.

Conclusion

Calculating the injection volume for a plastic injection machine is a multi - step process that requires careful consideration of part design, mold design, plastic material properties, and machine specifications. By using the appropriate calculation methods and fine - tuning the volume during production, you can ensure high - quality molded parts and efficient production.

If you are in the market for a plastic injection machine or need further assistance with injection volume calculation, we are here to help. Our team of experts can provide you with personalized solutions based on your specific requirements. Contact us to start a fruitful discussion about your plastic injection molding needs.

References

  • "Plastic Injection Molding Handbook" by O. Olabisi
  • "Injection Molding for Medical Applications" by Peter A. Clausing