Zhejiang Arbueo Intelligent Equipment Manufacturing Co., Ltd.

What is the cause of short shots in injection molding?

Oct 13, 2025Leave a message

Short shots in injection molding are a common and frustrating issue that can significantly impact the quality and efficiency of the manufacturing process. As a leading supplier of injection machines, we understand the importance of addressing this problem to ensure our customers achieve optimal results. In this blog post, we will explore the various causes of short shots in injection molding and provide insights on how to prevent them.

1. Insufficient Material Supply

One of the primary causes of short shots is insufficient material supply to the mold cavity. This can occur due to several reasons:

  • Incorrect Hopper Loading: If the hopper is not loaded properly or runs out of material during the injection process, there won't be enough plastic to fill the mold completely. Operators should regularly check the hopper level and ensure it is filled to an appropriate level.
  • Blockages in the Feeding System: Blockages in the feeding system, such as in the barrel or the screw, can restrict the flow of material. This can be caused by foreign objects, degraded plastic, or improper screw design. Regular maintenance and inspection of the feeding system are essential to prevent blockages.
  • Inadequate Plasticizing Capacity: If the injection machine's plasticizing capacity is too low for the size and complexity of the part being molded, it may not be able to melt and deliver enough material in a timely manner. In such cases, upgrading to a machine with a higher plasticizing capacity may be necessary.

2. Injection Pressure and Speed Issues

Injection pressure and speed play a crucial role in filling the mold cavity. Insufficient pressure or speed can result in short shots:

  • Low Injection Pressure: If the injection pressure is too low, the molten plastic may not be able to flow into all areas of the mold cavity. This can be due to incorrect pressure settings, a worn-out injection unit, or a clogged nozzle. Adjusting the injection pressure to the appropriate level for the specific material and part design is essential.
  • Slow Injection Speed: A slow injection speed can cause the plastic to cool and solidify before it fills the entire mold cavity. This is particularly problematic for parts with thin walls or long flow paths. Increasing the injection speed can help ensure that the plastic reaches all areas of the mold before it solidifies.
  • Pressure Loss in the Mold: Pressure loss can occur in the mold due to factors such as a narrow gate, a long runner system, or a high - viscosity material. Designing the mold with appropriate gate and runner sizes and optimizing the mold layout can help reduce pressure loss.

3. Mold Design Problems

The design of the mold itself can also contribute to short shots:

Hot Runner Injection Molding MachineHot Runner Injection Molding Machine

  • Inadequate Gate Design: The gate is the opening through which the molten plastic enters the mold cavity. If the gate is too small, it can restrict the flow of plastic and cause short shots. On the other hand, if the gate is too large, it can lead to other issues such as excessive flashing. Choosing the right gate size and location based on the part geometry and material properties is crucial.
  • Poor Venting: During the injection process, air needs to escape from the mold cavity. If the mold is not properly vented, air can become trapped, preventing the plastic from filling the cavity completely. Adding vents to the mold in strategic locations can help release the trapped air.
  • Complex Part Geometry: Parts with complex geometries, such as thin - walled sections, undercuts, or long flow paths, are more prone to short shots. In such cases, the mold design may need to be optimized, or additional injection techniques may be required to ensure complete filling.

4. Material - Related Factors

The properties of the plastic material being used can also affect the filling process:

  • High Viscosity: Materials with high viscosity flow more slowly and require higher injection pressures to fill the mold cavity. If the material's viscosity is too high for the injection machine and mold design, short shots may occur. Selecting a material with a lower viscosity or adjusting the processing conditions to reduce the viscosity can help.
  • Moisture Content: Moisture in the plastic material can cause problems during the injection process. It can lead to steam formation, which can disrupt the flow of plastic and result in short shots. Drying the plastic material before use is essential, especially for hygroscopic materials.
  • Material Degradation: Overheating or prolonged exposure to high temperatures can cause the plastic material to degrade. Degraded material may have different flow properties and can lead to short shots. Controlling the processing temperature and ensuring proper material handling are important to prevent material degradation.

5. Temperature Control

Proper temperature control is critical for successful injection molding:

  • Low Mold Temperature: A low mold temperature can cause the plastic to cool and solidify too quickly, preventing it from filling the entire mold cavity. Maintaining the mold at the appropriate temperature range for the specific material is essential. This can be achieved through the use of temperature - control systems such as water or oil heaters.
  • Inconsistent Barrel Temperature: Inconsistent barrel temperature can lead to uneven plasticizing of the material. If the plastic is not melted uniformly, it may not flow properly into the mold cavity. Regular calibration and monitoring of the barrel temperature sensors are necessary to ensure consistent temperature control.

Solutions and Recommendations

To prevent short shots in injection molding, the following steps can be taken:

  • Optimize Machine Settings: Carefully adjust the injection pressure, speed, temperature, and other machine settings based on the material and part requirements. Conduct trial runs and make incremental adjustments to find the optimal settings.
  • Maintain the Injection Machine: Regularly clean, lubricate, and inspect the injection machine to ensure its proper functioning. Replace worn - out parts such as screws, barrels, and nozzles as needed.
  • Improve Mold Design: Work with experienced mold designers to optimize the gate, runner, and venting systems. Consider the part geometry and material properties when designing the mold.
  • Select the Right Material: Choose a plastic material that is suitable for the part design and the injection molding process. Consider factors such as viscosity, moisture absorption, and heat resistance.

As an injection machine supplier, we offer a wide range of high - quality machines to meet your specific needs. Our Chair Injection Moulding Machine is designed for efficient and precise chair production, while our Hot Runner Injection Molding Machine provides excellent control over the plastic flow. For PET bottle production, our Injection Molding Machine for PET Bottles offers reliable performance.

If you are facing short shot issues or are looking to upgrade your injection molding equipment, we are here to help. Our team of experts can provide you with customized solutions and technical support. Contact us to discuss your requirements and start a successful partnership in injection molding.

References

  • Throne, J. L. (2001). Plastics Rheology and Processing. Marcel Dekker.
  • Rosato, D. V., Rosato, D. V., & Rosato, M. G. (2000). Injection Molding Handbook. Hanser Gardner Publications.
  • Beaumont, J. P. (1999). Injection Molding Runner and Gating Design Handbook. Hanser Gardner Publications.