Zhejiang Arbueo Intelligent Equipment Manufacturing Co., Ltd.

What causes the flash in injection - molded parts in an injection molding machine?

Sep 24, 2026Leave a message

Hey there! As a supplier of injection molding machines, I've seen my fair share of issues in the industry. One of the most common problems that manufacturers face is the appearance of flash in injection-molded parts. Flash is that unwanted thin layer of plastic that seeps out of the mold cavity and forms around the edges of the part. It can be a real headache, affecting the quality and aesthetics of the final product. So, let's dive into what causes this pesky flash in injection-molded parts.

1. High Injection Pressure

One of the primary culprits behind flash is high injection pressure. When the pressure used to inject the molten plastic into the mold is too high, it can force the plastic to squeeze out of the mold's parting line or any other gaps. This is especially true if the mold is not properly designed or maintained.

1800-ton horizontal hydraulic injection molding machine1800-ton horizontal hydraulic injection molding machine

Imagine you're trying to fill a balloon with air. If you blow too hard, the air will start to leak out from the sides. The same principle applies to injection molding. When the injection pressure is excessive, the plastic will find its way out of the mold, creating flash.

To avoid this, it's crucial to set the injection pressure at the right level. This requires a good understanding of the material being used, the size and complexity of the part, and the capabilities of the injection molding machine. Our 1800 - ton horizontal hydraulic injection molding machine is designed to provide precise control over the injection pressure, helping to minimize the risk of flash.

2. Poor Mold Design

Another major cause of flash is poor mold design. If the mold is not designed correctly, there may be gaps or uneven surfaces where the plastic can escape. For example, if the parting line of the mold is not perfectly aligned, the plastic can seep out at the junction.

Additionally, the gate design plays a crucial role. If the gate is too large or too small, it can affect the flow of the plastic and lead to flash. A well-designed gate should allow the plastic to flow smoothly into the mold cavity without causing excessive pressure.

Our team of experts can help you design a mold that is optimized for your specific application. Whether you need a mold for a simple part or a complex component, we have the experience and expertise to ensure a high - quality design. And if you're looking for a machine to work with your mold, our 170Ton PET Horizontal Hydraulic Injection Molding Machine is a great choice for PET applications.

3. Worn - Out Mold

Over time, molds can wear out due to repeated use. This wear and tear can cause the mold to lose its precision, resulting in gaps where the plastic can escape. The surfaces of the mold may become rough or damaged, which can also contribute to flash.

Regular maintenance of the mold is essential to prevent this. This includes cleaning the mold after each use, inspecting it for signs of wear, and making any necessary repairs. If the mold is severely worn, it may need to be replaced.

Our company offers mold maintenance services to help you keep your molds in top condition. We can also provide you with replacement molds if needed. Our 650 - ton horizontal hydraulic injection molding machine is compatible with a wide range of molds, ensuring that you can get the most out of your investment.

4. Incorrect Clamping Force

The clamping force of the injection molding machine is another factor that can cause flash. If the clamping force is too low, the mold may not be held together tightly enough during the injection process. This allows the plastic to escape from the mold cavity.

On the other hand, if the clamping force is too high, it can damage the mold and cause other problems. Finding the right clamping force is crucial for preventing flash. It depends on the size and shape of the part, as well as the material being used.

Our injection molding machines are equipped with advanced clamping systems that allow for precise control of the clamping force. This ensures that the mold is held securely during the injection process, reducing the risk of flash.

5. Material Issues

The type of plastic material used can also contribute to flash. Some materials have a lower viscosity, which means they flow more easily. This can make them more likely to seep out of the mold if the conditions are not right.

Additionally, the moisture content of the plastic can affect its flow properties. If the plastic is too moist, it can cause problems during the injection process, including flash. It's important to dry the plastic properly before using it in the injection molding machine.

We can provide you with advice on the best materials to use for your specific application. Our team has extensive knowledge of different plastics and can help you choose the one that will give you the best results.

6. Machine Malfunctions

Sometimes, flash can be caused by malfunctions in the injection molding machine itself. For example, a problem with the injection unit, such as a worn - out screw or a faulty valve, can affect the flow of the plastic and lead to flash.

Regular maintenance and inspection of the machine are essential to prevent these issues. Our technicians are trained to diagnose and repair any problems with the injection molding machine quickly and efficiently.

How to Solve the Flash Problem

Now that we've identified the causes of flash, let's talk about how to solve it. Here are some steps you can take:

  • Adjust the injection pressure: Lower the injection pressure if it's too high. This may require some trial and error to find the right level.
  • Improve the mold design: Work with a professional mold designer to ensure that the mold is properly designed and maintained.
  • Maintain the mold: Regularly clean and inspect the mold for signs of wear and tear. Make any necessary repairs or replacements.
  • Check the clamping force: Make sure the clamping force is set at the right level for your part.
  • Choose the right material: Select a plastic material that is suitable for your application and make sure it is properly dried.
  • Maintain the machine: Keep the injection molding machine in good working condition by performing regular maintenance and inspections.

If you're still having trouble with flash in your injection - molded parts, don't hesitate to contact us. We're here to help you find the best solution for your specific needs. Whether you need a new injection molding machine, a mold design, or maintenance services, we've got you covered.

If you're interested in purchasing an injection molding machine or discussing your requirements further, we'd love to hear from you. Just reach out to us, and our team of experts will be happy to assist you. We're committed to providing high - quality products and excellent customer service.

References

  • "Injection Molding Handbook" by Dominik Roy
  • "Plastics Processing Technology" by John A. Brydson

So, there you have it! I hope this blog has given you a better understanding of what causes flash in injection - molded parts and how to solve it. If you have any questions or need more information, feel free to drop us a line. We're always here to help!