As a supplier of large injection molding machines, I've encountered various issues with the injection unit over the years. The injection unit is a critical component of the machine, responsible for melting and injecting plastic into the mold. When problems arise, it can lead to production delays and quality issues. In this blog, I'll share some troubleshooting steps for the injection unit of a large injection molding machine.
1. Check the Power Supply
The first step in troubleshooting any machine is to ensure that it has a proper power supply. A faulty power connection can cause the injection unit to malfunction. Start by checking the main power switch and circuit breakers. Make sure they are turned on and not tripped. If the power supply seems to be working fine, check the electrical connections to the injection unit. Loose or damaged wires can lead to intermittent power issues.
2. Inspect the Heating System
The heating system is essential for melting the plastic in the injection unit. If the plastic is not melting properly, it can cause problems with the injection process. Check the heating bands and thermocouples for any signs of damage or wear. A damaged heating band may not provide enough heat, while a faulty thermocouple can give inaccurate temperature readings. Replace any damaged components as necessary.
It's also important to monitor the temperature settings. Make sure the temperature is set correctly for the type of plastic being used. Different plastics have different melting points, so it's crucial to follow the manufacturer's recommendations. If the temperature is too low, the plastic may not melt completely, resulting in poor part quality. On the other hand, if the temperature is too high, it can cause the plastic to degrade and produce defects.
3. Examine the Screw and Barrel
The screw and barrel are key components of the injection unit. They are responsible for conveying, melting, and injecting the plastic. Over time, the screw and barrel can wear out, leading to problems with the injection process. Inspect the screw for any signs of wear, such as scratches or grooves. A worn screw may not be able to convey the plastic effectively, resulting in inconsistent shot sizes and poor part quality.
Check the barrel for any signs of damage or corrosion. A damaged barrel can cause the plastic to leak or not flow properly. If the screw or barrel is worn or damaged, it may need to be replaced. It's important to use high-quality replacement parts to ensure optimal performance.
4. Check the Hydraulic System
Many large injection molding machines use a hydraulic system to power the injection unit. The hydraulic system is responsible for providing the force needed to move the screw and inject the plastic. Check the hydraulic fluid level and make sure it is within the recommended range. Low hydraulic fluid can cause the system to malfunction.
Inspect the hydraulic hoses and fittings for any signs of leaks. A leak in the hydraulic system can lead to a loss of pressure and affect the performance of the injection unit. Tighten any loose fittings or replace any damaged hoses.
Also, check the hydraulic pump and valves. A faulty pump or valve can cause problems with the pressure and flow of the hydraulic fluid. If you suspect a problem with the hydraulic system, it's best to consult a professional technician.


5. Verify the Injection Molding Parameters
The injection molding parameters, such as injection speed, pressure, and time, play a crucial role in the quality of the molded parts. If the parameters are not set correctly, it can cause problems with the injection process. Review the injection molding parameters and make sure they are appropriate for the part being molded.
Start by checking the injection speed. If the injection speed is too slow, it can cause the plastic to cool before it fills the mold completely, resulting in short shots. On the other hand, if the injection speed is too fast, it can cause the plastic to splash or create air bubbles in the part. Adjust the injection speed as necessary to achieve the desired results.
Next, check the injection pressure. The injection pressure should be sufficient to fill the mold completely but not too high to cause excessive flash or damage to the mold. Monitor the pressure during the injection process and make any necessary adjustments.
Finally, check the injection time. The injection time should be long enough to ensure that the mold is filled completely but not too long to cause the plastic to overheat or degrade. Adjust the injection time based on the size and complexity of the part.
6. Clean the Nozzle and Sprue Bushing
The nozzle and sprue bushing are the final components through which the plastic passes before entering the mold. Over time, these components can become clogged with plastic residue, which can affect the flow of the plastic and cause problems with the injection process. Clean the nozzle and sprue bushing regularly to prevent clogs.
Use a suitable cleaning tool, such as a nozzle cleaner or a wire brush, to remove any plastic residue from the nozzle and sprue bushing. Make sure to follow the manufacturer's instructions when cleaning these components to avoid damaging them.
7. Conduct a Test Shot
After performing all the above troubleshooting steps, it's a good idea to conduct a test shot. A test shot can help you determine if the problems with the injection unit have been resolved. Set up the machine for a test shot and monitor the injection process closely.
Check the quality of the test part. Look for any signs of defects, such as short shots, flash, or air bubbles. If the test part looks good, it's a sign that the injection unit is working properly. If there are still problems, you may need to repeat the troubleshooting steps or seek further assistance.
In conclusion, troubleshooting the injection unit of a large injection molding machine requires a systematic approach. By following these steps, you can identify and resolve many common problems with the injection unit. However, if you encounter any complex or persistent issues, it's always a good idea to consult a professional technician.
If you are in the market for a large injection molding machine or need assistance with troubleshooting your existing machine, we are here to help. We offer a wide range of Bottle Injection Molding Machine, Injection Stretch Blow Molding Machine, and Tabletop Injection Molding Machine. Contact us to discuss your requirements and explore how our machines can meet your production needs.
References
- "Injection Molding Handbook" by O. Olafsson
- "Plastics Processing Technology" by J. Beaumont

